Standard dimensions
Metric hose dimensions ranging from 1 x 2 to 30 x 33 mm (Inner- x outer diameter). The standard dimensions are metric – Special sizes available on request.
Inner diameter |
Wall thickness |
||
|---|---|---|---|
| mm | mm | mm | mm |
| 2,0 | 0,50 | 0,75 | 1,00 |
| 3,0 | 0,50 | 0,75 | 1,00 |
| 3,5 | 0,50 | 0,75 | 1,00 |
| 4,0 | 0,50 | 0,75 | 1,00 |
| 4,5 | 0,50 | 0,75 | 1,00 |
| 5,0 | 0,50 | 0,75 | 1,00 |
| 5,5 | 0,50 | 0,75 | 1,00 |
| 6,0 | 0,50 | 0,75 | 1,00 |
| 6,5 | 0,50 | 0,75 | 1,00 |
| 7,0 | 0,50 | 0,75 | 1,00 |
| 7,5 | 0,50 | 0,75 | 1,00 |
| 8,0 | 0,50 | 0,75 | 1,00 |
| 8,5 | 0,50 | 1,00 | |
| 9,0 | 0,50 | 0,75 | 1,00 |
| 9,5 | 0,75 | 1,00 | |
| 10,0 | 1,00 | ||
| 11,0 | 1,00 | ||
| 12,0 | 1,00 | ||
| 13,0 | 1,00 | ||
| 14,0 | 1,00 | ||
| 15,0 | 1,50 | ||
| 16,0 | 1,00 | 1,50 | |
| 18,0 | 1,50 | ||
| 19,0 | 1,50 | ||
| 20,0 | 1,50 | ||
| 22,0 | 1,50 | ||
| 25,0 | 1,50 | ||
Tolerances for standard dimensions
Inner diameter (mm) ± tolerance (mm)
| 3 up to 5 | ± 0,2 | |
| higher than | 5 up to 7 | ± 0,25 |
| higher than | 7 up to 10 | ± 0,3 |
| higher than | 10 up to 15 | ± 0,35 |
| higher than | 15 up to 20 | ± 0,4 |
Wall thickness (mm) ± tolerance (mm)
| 0,5 up to 1,0 | ± 0,15 | |
| higher than | 1,0 up to 2,0 | ± 0,2 |
| higher than | 2,0 up to 4,0 | ± 0,4 |
| higher than | 4,0 up to 6,0 | ± 0,5 |
Restricted tolerances are available on request. (e.g. in cases in which the PTFE-hose is fitted with compressed air fittings)