A6093 Silicon Tubing
Silicon Tubing without Reinforcement (Fabric)
A6093 is an advancement of silicon quality A6092. This formulation is platinum-cured.
A6093 is an advancement of silicon quality A6092. This formulation is platinum-cured. A6093 silicon tubing is provided by default with an excellent abrasion-resistant white ink imprinting according to DIN 26055 Part 2, Type 1 without reinforcement (E DIN EN 16821:2015:03). Customer-requested imprinting can be offered.
Multiple options regarding internal diameter and wall thickness are provided. A selection of the currently most common dimensions can be reviewed in the table below.
Operation pressure and bending radius correspond to DIN 26055, Part 2, Type 1 without reinforcement (E DIN EN 16821:2015:03).
A detailed list of standards and regulations that have been considered are provided on Page 4 of this brochure.
A6093 quality material of 60+/- 5 Shore A is obtained from a special raw material. Other Shore hardness materials can be provided upon request.
All tests have been performed with the end product. A summary and discussion of results is described in the Regulatory Support File (RSF) that can be provided upon request.
The transparent tubing without reinforcement of TECNO PLAST quality A6093 can be used in the temperature range of -60 to +180 °C, also up to +200 °C on a short-term basis (depending on the medium).
Selection of the currently most common dimensions
|Silicon Quality A6093 without Reinforcement
Dimensions in mm / inner diameter x wall thickness
|1,6 x 1,6||3,0 x 1,0||3,0 x 1,5||3,0 x 4,0||3,2 x 1,6|
|3,2 x 2,4||4,0 x 2,0||4,0 x 2,4||4,0 x 3,0||4,8 x 1,6|
|4,8 x 2,0||4,8 x 2,4||5,0 x 1,5||5,0 x 2,5||5,0 x 3,0|
|6,0 x 2,0||6,0 x 3,0||6,4 x 1,6||6,4 x 2,4||6,4 x 3,2|
|7,9 x 2,4||7,9 x 3,2||8,0 x 1,6||8,0 x 2,0||8,0 x 3,0|
|8,0 x 4,0||8,5 x 3,25||9,5 x 2,4||9,5 x 3,2||9,6 x 3,2|
|10,0 x 2,5||10,0 x 3,0||10,0 x 4,0||12,0 x 3,2||12,7 x 3,2|
|15,9 x 3,2||16,0 x 5,0||19,0 x 3,2||20,0 x 5,0||25,4 x 4,8|